Wednesday, December 23, 2015

Adding a new, "old" door to bring it together.

Door before
The door on this little house never quite fit.  It was also falling to pieces and in need of replacement. 
I am currently working on a new project down the street and found an old tongue and groove door in the basement that I thought would work here.  This opening is 36 inches wide, so it's not standard.
200 year old door - very heavy!
The door needed to be cut to fit this low clearance opening.
door cut to size

Next, the door needed to be reinforced for the long term and have a solid place for the hinges to be attached.

Add caption

The door was flipped around and patched with Durham's Wood Patch

Patched door section will be inside edge so traffic will not destroy it over time.

Here is the door after final prep...
View of inside of primed door



Door after paint and installation.
After install - prior to finishing.

I found an old iron door pull from another door in the basement of my 34 project.  After spray painting it black, it's ready for it's new job. 
New, "old" hardware.



The finished door looks much better and is more secure.  A deadbolt was later added to allow access from the outside.   
Finished new door.

















       

Maintaining properties - paint and prep!

Maintaining my rental properties is important to me. Even though people joke about it, I am not a slum lord.  This little house was purchased 11 years ago as a potential flip, but was rented instead and the same great family has been there ever since.

Porch before - 11 years ago
At the time of the initial reno, I pulled off the decorative brick facade, exposed the stone and had it re pointed.  We added new windows, cut the door and moved it to the front eliminating a well where leaves and trash would collect from the street.  Now, 11 years later,  it's time repair and paint the porch, door and block.


front of house before  - 11 years ago


Front of house now - after

rotted wood before
Porch after
(2)New crawlspace door & cracks patched with mortar

(1) House prior to new paint and new door
(3) Block primed with drylock primer
After Paint of block

Tuesday, October 6, 2015

Adding a parking lot at #34

There is metered parking in front of the building which is becomes a negative if you have to worry about tickets at your primary residence. So, I decided to add a parking lot in the rear of this building allowing for designated, off-street parking for my tenants. It actually looks like it belongs there and when all of the landscaping is completed, I think it will look fantastic.  There will still be outdoor space for the tenants to sit and I will have less mowing. Here are some shots of the process.


burning took off a bit quickly



Lot after

Sunday, October 4, 2015

Project 2015 - update


It's been a while since I've posted anything because it's been a very busy summer. In addition to fixing up properties, I'm also a licensed real estate agent, so I have been selling houses, finding good tenants for my properties and for other landlords.  Tenants generally move in the summer, so this is the time to have your property ready and work hard to get good tenants.

Installing sewer line
With Gerty's place, I've accomplished my goal of having the entire right half of the property completed and rented within a year of purchase.  It sounds like a long time, but this was a large undertaking including 2 units and a new office for me.  And I am a one man operation.  I hire skilled tradesmen for specific areas like HVAC and electrical, but most of it is on me.  Besides, many of the improvements were to the overall infrastructure of the building, so finishing the next 2 units will be much easier and faster!

 
After sewer and gas line install & prior to
 sidewalk and street excavation.

The timing of this project seemed to put me in the eye of a perfect storm as well.  The town decided to tear up the streets and install new gas lines and they required the property owners to replace sidewalks and curbs at the owners' expense.  Although this was a hit to my wallet and not in the original budget, it allowed me to run gas service to the right side of the building where it did not exist before.  I also put in a new sewer line which I had to do anyway, so the timing was actually good in the end.  I was also able to address some drainage issues with the sidewalks and in the end, the'll look nice and new - not all patched up.  With all the work being done on this street, at times, there were 8 different construction crews there. It was a real mess.

The outside still needs paint and some fixtures, but the inside is new and, in my opinion, very nice. I will post shots of the inside in the near future.



forming up the curbs
ready for sidewalks

8 Crews working on the street

Saturday, April 4, 2015

More excitement - installing a sump pit at #34!

I actually get excited when installing a sump pit.  Seriously.  Hey, it's going to help solve my basement water problem and act as an insurance policy for flash flooding situations.  I also get in a 2 day, cross fit style work out.

This is really step two. In my last post, because of the previous mold problem in the basement, I found the areas where the water was entering the basement from outside and fixed them.  However, the water table can also rise from below and I'm pretty sure that's happening in this basement.
wet basement before

The before picture shows the basement with about 3 inches of sitting water. Would you want to live above this?  It also has some little ghosts zipping around - or maybe that's dust...?

The basin

 I didn't know it, because it was always so muddy, but this basement was finished with some sort of concrete, so I used my trusty Stark jackhammer to break it up at the low end where the water will drain to.  I laid the pipe in there to see if it would fit and to also check the fall. I marked the basin with a sharpie cut the hole for the pipe to enter.  At this point I also drilled holes all over the basin for water to be able seep in. Sediment fabric was wrapped around the basin and placed it in the large hole with space for stones below it, and around it.  I laid the same fabric in the trench and shoveled stones over it.  I slid the pipe into the hole in the basin and making sure the holes in the pipe were facing on the bottom sides of the pipe, attached them with an angle bracket and 2 screws so it stayed in place.  I wrapped the fabric around the pipe and even used a little bit of duct tape to hold it in place until the rest of the stone was shoveled on top of it.

The hardest part of this job was all of the digging and carrying the clay and rubble out of the basement.  The entire job took 2 solid days and most of the time was spent removing the dirt bucket by bucket. Getting the stone in was more fun though. We made a small chute out of wood, poured the stone in and spread it around.
Digging for the drainage pipe
final basement prior to pump install 
If you look closely, you can see the lid for the sump pit to the right of that big rock.  An actual pump will be installed to get the water out.  The big rock will stay because it's heavy! I decided to spread gravel all over the floor so it's cleaner walk on.  Otherwise, this is it.  The basement will not be finished any more than this. It'll just be used for access to the water heaters and other utility repairs when needed.  

Pouring the slab for water heaters

finished slab for water heaters

Tuesday, March 31, 2015

First things first. Fixing mold problems at #34

Once we closed on the property and got into the house, we knew the first thing to do was to address the mold problem in the basement - exciting!  I am not an expert on mold, but I do know it needs moisture to thrive and the basement had lots of it.  The basement also had lots of wood and no circulating air... perfect if you're mold!    
I'm not going to tell anyone to do this themselves, because certain types of mold can be harmful to your health.  I however, chose to risk it and kill it myself. :)   I actually took many precautions including a suit and mask and even eye protection. I used different concoctions which I mixed and sprayed and scrubbed based on extensive research and depending on the surface involved.  I won't put these recipes here because I don't want anyone to blame me for their mold illnesses, but some batches had hydrogen peroxide, some had borax, some used bleach and some used vinegar - do your own research or even better, call a pro.

First things first, find out where the water's coming in and stop it.  The main culprit here was a hole in the ally's sidewalk where water from the neighbors gutter was pouring into and finding it's way into my basement. This had been going on for years!
I pulled up the loose top cement layer and poured a soupy mix of mortar in there so it would hopefully follow the path of the water and fill in the small areas.  I then packed the hole with 35 gallons of stone and dirt and other matter. I packed in there with a broom handle and patched it with cement.  This will do the trick, but is still a temporary fix since all the sidewalks will be fixed in the summer and this area will require trench drain.

Second thing is to get a dehumidifier in the basement running 24/7 - done.  Water was dripping against the front of the building from the front gutters which were leaking from 2 small holes.  These were sealed with gutter sealant .  Problem fixed - sort of. Since this house is over 200 years old, the front basement will need to be monitored over time to see if there are more areas of water infiltration.

The back basement will also need a sump pit and pump as it seems to fill from below ground.
ally with water poring into hole


ally from opposite end
Ally after holes were filled and patched

   

Saturday, March 28, 2015

The new project for 2015!

Front
Here it is.  Renovation 2015!  I say that with enthusiasm because I love buying and renovating investment properties.  I have seen almost everything, and always plan on surprises when deciding to buy, but this one has already proven to be a leaning experience. In future posts, I'll post more on the condition and what's being done to fix the place.

Back Yard
Purchased at the end of 2014, number 34 was an estate previously owned by a woman that lived lived there for almost 70 years.  Her name was Gerty, so, as well as #34,  we have been referring to the place as, "Gerty's house."

The right side has 2 existing apartments and a small office.  The left side had been used as a 4 bedroom house and will be converted into 2 units, each having 2 bedrooms and 2 stories. The back half of the yard will be made into a gravel parking lot with 8 spaces and the other half of the yard will be an outdoor living space for tenants. The office will be my new work digs.

In addition to the main building, there is an old barn at the back of the property.  It will stay as-is for now and be fixed up later.  What's another year after sitting for 200!
Barn


     

Thursday, February 5, 2015

Updating a tired old kitchen without major cost. (at unit #9)

Kitchen before  - unit #9 
As I've said in previous posts, when fixing up a rental property, I always want the place to be nice and clean with nothing left undone.  I also try to add some things that I'd want if I lived there.  In the case of the kitchen at number 9, we did some updating. The only thing we added, that wasn't there before, was the dishwasher.  I always add them into my rentals even though some landlord friends of mine tell me I'm wasting my money.  Really? I just don't think this is considered a luxury item anymore, is it?    So I add dishwashers in my units and if you're a landlord, just do it.  :)

Kitchen after - unit #9
In this kitchen, the top cabinets were well built and in the right place, so I painted them.  The lower cabinets and counter top were metal and past their prime, so we replaced them.  I used semi-custom cabinets and a laminate counter top built for this area. If you go back to my Markes house kitchen post, you may notice the same color choices for the counters and the walls.  The flooring is also the same - this is intentional and I'll talk about the reasons for this in another post.    

The existing refrigerator was still working, however, it was old and didn't seem like a very good place to store food, so that went away.  Our utility company actually has a program where they will pay you $50 for old inefficient appliances to get them out of circulation, and they come to your home and take them away!  The guys that came to get the fridge wanted to just throw it out my new second story window, but I had to be the adult and asked them to please take it down the stairs.

Since the new appliances were black, the hood over the oven didn't match.  It was in working order, so I decided to tape it off and paint it with black spray paint.  I also got rid of the lights hanging to each side of the window and added one recessed light over the sink in the ceiling.  Again, I had my electrician install GFI outlets to make it safe.

We finally added an additional slim cabinet with a counter top to the left of the stove that holds cookie sheets and works well under the overhead cabinet.

In the end, the biggest expense with this kitchen was the new appliances. And those needed to be replaced anyway. So, with lots of paint, a small bit of electrical work, new lower cabinets, counter top, new linoleum for the floor, and with no layout changes, this rental has an updated kitchen without breaking the bank.  

Sunday, February 1, 2015

"Does that look right?" A question of flow at unit #9.

before
   In my former career as a graphic artist, regardless of how complicated a project became, there was always one question I could ask to absolutely simplify the situation:  "Does that look right?"  It required a simple yes or no answer.  If the answer was "yes", I was done.   If the answer was "no", than I could build on it with one of my next questions:  "Why?" or "What do we need to do to make it look right?"

In the case of unit number 9, the relationship (flow) to the living room and kitchen did not "look right". Why? It was dark and getting to the kitchen took effort.  Once you made the effort to get into the kitchen, you felt like you were in a different country - totally cut-off from the rest of the place. You also had to walk through the work area of the kitchen just to sit down at the table.

"What do we need to do to make it look right?"  Well, we could take out the wall to the left of the fireplace if it was not load bearing.  With my rentals, I really don't get involved with removing load bearing walls and then building headers to support a load just to make a place look right, (unless you are walking through bedrooms to get to other bedrooms), this is where I draw the line.  I actually do care about the cost and time involved.  I may be able to get a little more rent for a brighter place with better flow, but if it's structural and not a necessity, I ain't doing it. In this case, the wall was cosmetic, so we went for it, and tore it down.
after

Once it was put back together, painted, and the new flooring was put down, the new opening positively changed the flow of the living room/kitchen relationship.  This layout allowed for more light, and totally different furniture layout options for both rooms.  One other benefit gained was the use of the heat in the living room from the large radiator in the back corner of the kitchen!

So, does that look right now? I think... YES!